Start

Starts the KINGSTAR Subsystem. This starts an EtherCAT network at the same time.

Syntax

KsCommandStatus Start();

Return value

Returns the KsCommandStatus structure.

Remarks

• Use this function to start the KINGSTAR Subsystem after initializing and setting the parameters.
• It has the same effect as you use RequestState to request the EtherCAT state Op (ecatOP).
• Start scans the devices on an EtherCAT network while Restart doesn't, so it is slower than Restart.
• Some hardware may require more than 30 seconds to be started when ConfigureDc's CheckStatus is TRUE.

Usable EtherCAT states

ecatOffline

Example

BOOL StartKingstar() {
   //Launch or connect to the KINGSTAR Subsystem process
   KsError nRet = errNoError;
   nRet = Create(INSTANCE, 0);

   SubsystemStatus Subsystem = { ecatOffline, ecatOffline, 0, 0, 0, 
	{ecatOffline}, {ecatOffline}, {axisOffline} };
   GetStatus(&Subsystem, NULL);
   if (Subsystem.State == ecatOP) {
      RtPrintf("Subsystem already started: %x\n", nRet);
      return TRUE;
   }
   else if (Subsystem.State != ecatOffline) {
      RtPrintf("Subsystem in unexpected state: %d\n", Subsystem.State);
      return FALSE;
   }

   //Configure the Subsystem settings
   nRet = SetCycleTime(cycle500);
   nRet = SetAxisAccessMode(accessPos);
   nRet = EnableServerLog(FALSE);
   nRet = EnableAxisInput(TRUE);
   nRet = EnableAxisOutput(FALSE);
   nRet = EnableSecondEncoder(FALSE);
   nRet = EnableActualVelocity(TRUE);
   nRet = EnableActualTorque(TRUE);
   nRet = EnableActualCurrent(TRUE);
   nRet = EnableFollowingError(TRUE);
   nRet = EnableMaxTorque(TRUE);
   nRet = EnableMaxCurrent(TRUE);
   nRet = EnableTorqueOffset(FALSE);
   nRet = EnableProfilePosition(FALSE);
   nRet = EnableSynchronizedControlMode(TRUE);
   nRet = EnableAutoRestart(TRUE);
   nRet = EnableAutoRepair(TRUE);
   nRet = EnableAutoConfig(TRUE);
   nRet = ConfigureDc(TRUE, TRUE, FALSE, 0);
   nRet = EnableHotConnect(TRUE);
   nRet = EnableRedundancy(TRUE);
   nRet = SetConfiguredAxesCount(1);
   nRet = SetConfiguredIoCount(3);
   SlaveStatus simulatedIo = { 0 };
   simulatedIo.InputLength = 16;
   simulatedIo.OutputLength = 16;
   for (int i = 0; i < IO_COUNT; i++) {
      nRet = ConfigureIo(i, simulatedIo);
   }

   SlaveStatus axisDefinition = { "Simulated Axis", 0 };
   ConfigureAxis(0, axisDefinition, 131072);

   //Start the EtherCAT network
   //This function is asynchronous so the network is not started yet when it returns
   KsCommandStatus status = WaitForCommand(30, TRUE, Start());

   return TRUE;
}

Requirements

	RT	Win32
Minimum supported version	4.0	4.0
Header	ksapi.h	ksapi.h
Library	KsApi_Rtss.lib	KsApi.lib

See also

ConfigureDc

Create

Destroy

Stop