EnableAxisOutput

Adds the Digital Output variable to the PDO. Not all servo drives support this feature.

Syntax

KsError EnableAxisOutput(
     BOOL Active
);

Parameters

Active: TRUE: the Digital Output variable is mapped to PDO. FALSE: not mapped to PDO. By default, it is FALSE.

Return value

If the function succeeds, it returns errNoError, otherwise an error code. For more information about the error code, see the KsError list.

Remarks

This function must be called after Create and before Start.

Usable EtherCAT states

ecatOffline

Example

BOOL StartKingstar() {
   //Launch or connect to the KINGSTAR Subsystem process
   KsError nRet = errNoError;
   nRet = Create(INSTANCE, 0);

   SubsystemStatus Subsystem = { ecatOffline, ecatOffline, 0, 0, 0, 
	{ecatOffline}, {ecatOffline}, {axisOffline} };
   GetStatus(&Subsystem, NULL);
   if (Subsystem.State == ecatOP) {
      RtPrintf("Subsystem already started: %x\n", nRet);
      return TRUE;
   }
   else if (Subsystem.State != ecatOffline) {
      RtPrintf("Subsystem in unexpected state: %d\n", Subsystem.State);
      return FALSE;
   }

   //Configure the Subsystem settings
   nRet = SetCycleTime(cycle500);
   nRet = SetAxisAccessMode(accessPos);
   nRet = EnableServerLog(FALSE);
   nRet = EnableAxisInput(TRUE);
   nRet = EnableAxisOutput(FALSE);
   nRet = EnableSecondEncoder(FALSE);
   nRet = EnableActualVelocity(TRUE);
   nRet = EnableActualTorque(TRUE);
   nRet = EnableActualCurrent(TRUE);
   nRet = EnableFollowingError(TRUE);
   nRet = EnableMaxTorque(TRUE);
   nRet = EnableMaxCurrent(TRUE);
   nRet = EnableTorqueOffset(FALSE);
   nRet = EnableProfilePosition(FALSE);
   nRet = EnableSynchronizedControlMode(TRUE);
   nRet = EnableAutoRestart(TRUE);
   nRet = EnableAutoRepair(TRUE);
   nRet = EnableAutoConfig(TRUE);
   nRet = ConfigureDc(TRUE, TRUE, FALSE, 0);
   nRet = EnableHotConnect(TRUE);
   nRet = EnableRedundancy(TRUE);
   nRet = SetConfiguredAxesCount(1);
   nRet = SetConfiguredIoCount(3);
   SlaveStatus simulatedIo = { 0 };
   simulatedIo.InputLength = 16;
   simulatedIo.OutputLength = 16;
   for (int i = 0; i < IO_COUNT; i++) {
      nRet = ConfigureIo(i, simulatedIo);
   }

   SlaveStatus axisDefinition = { "Simulated Axis", 0 };
   ConfigureAxis(0, axisDefinition, 131072);

   //Start the EtherCAT network
   //This function is asynchronous so the network is not started yet when it returns
   KsCommandStatus status = WaitForCommand(30, TRUE, Start());

   return TRUE;
}

Requirements

  RT Win32
Minimum supported version 4.0 4.0
Header ksapi.h ksapi.h
Library KsApi_Rtss.lib KsApi.lib

See also

Create

EnableSecondEncoder

EnableAxisInput

EnableSynchronizedControlMode

Start