KINGSTAR PLC Runtime

KINGSTAR PLC Runtime runs the PLC program created in KINGSTAR LogicLab. KINGSTAR PLC Runtime and KINGSTAR LogicLab can be installed on different computer, because KINGSTAR LogicLab can connect to KINGSTAR PLC Runtime over a network.

KINGSTAR PLC Runtime is bundled with KINGSTAR Runtime. When you install KINGSTAR Runtime, KINGSTAR PLC Runtime is installed too, but you need to purchase PLC Package to use it.

To use KINGSTAR PLC Runtime, see these sections:

• Configure Virtual NIC (if needed) – Virtual NIC is automatically configured when you install the KINGSTAR Subsystem. You don't need to configure it, but if you want to change the IP address of Virtual NIC, you can configure it manually. The guide is at one of the following locations:
  • (Simplified) KINGSTAR online and offline help > KINGSTAR Control Panel > Tools > Runtime Settings > Virtual Network
  • (Advanced) KINGSTAR online help > Manually configure subsystem settings > Configure Virtual NIC
• Start KINGSTAR PLC Runtime – Starts the KINGSTAR PLC Runtime in KINGSTAR Control Panel.